FusionCharts Forum / FusionCharts Free / XML Issue / I want to set the y-axis max and min limit from like 50 to 100 / Latest Posts

RE: I want to set the y-axis max and min limit from like 50 to 100

mlafentres — Fri, 28 Mar 2008 11:21:46 GMT

[quote][b]Pallav (3/21/2008)[/b][hr]Make sure that none of values are <60.[/quote]

I've got a similar problem. I found that I was trying to set my min value to the lowest value I was charting when I really needed to set it to a value LESS than my minimum value.

Thanks,

Mark

RE: I want to set the y-axis max and min limit from like 50 to 100

gbwis54301 — Fri, 28 Mar 2008 01:02:37 GMT

Edited to include my opening XML information...

I'm having a similar problem as this and the secondary y-axis problem reported last month, http://www.fusioncharts.com/forum/Topic3341-41-1.aspx. I set the minimum (3.00) and maximum (4.50) values the same for both axes but the S-axis starts at zero anyway.

I am using the Combination 2D bar/line graph to track local gas prices. If you don't read the chart carefully, the right-hand side of the chart looks like unleaded gas is 90 cents per gallon: http://www.wbay.com/Global/category.asp?C=74537

I tried the solution in last month's topic but that resulted in diesel prices becoming a bar chart (P-axis), not a line. I tried setting the SYAxisMinValue at 3, at 3.00, and 3.0. I tried setting the values in the XML file with quotation marks (") and single marks ('). I tried not setting values at all. I tried putting them before or after the PYAxis settings. I tried it with and without formatNumberScale.

I ensured none of the data is beneath 3.00 -- the lowest fuel (P-axis) price is 3.09, the lowest diesel (S-axis) price is 3.75.

Here is the opening of my XML file. If you need the complete data, let me know.

graph caption=' ' PYAxisName='Unleaded Price' SYAxisName='Diesel Price' bgSWF='pumpinggas.jpg' showShadow='0' canvasBgAlpha='40' canvasBorderThickness='0' SYAxisMinValue='3.00' SYAxisMaxValue='4.50' PYAxisMinValue='3.00' PYAxisMaxValue='4.50' hovercapbg='CEDBFF' hovercapborder='639AFF' formatNumberScale='0' numberPrefix='$' numberSuffix='.9' decimalPrecision='2' showvalues='0' animation='1' numdivlines='14' numVdivlines='0' rotateNames='1' outCnvBaseFontColor='FFFFFF'

RE: I want to set the y-axis max and min limit from like 50 to 100

Pallav — Fri, 21 Mar 2008 16:01:19 GMT

Make sure that none of values are <60.

I want to set the y-axis max and min limit from like 50 to 100

Mahesh Agarwal — Fri, 21 Mar 2008 00:05:01 GMT

Hi all,

the values i am passing to a multiseries line FS are between 60 to 80 and i set the y-axis max and min limit to 60 and 80 respectively. But chart is being plotted from 0 to 80. Why?

I want to set the limit from 60 to 80 only. What should i do?